DVD MODE | 39
Before placing a disc into the disc compartment,
make sure there is no disc inside. Hold the disc
without touching its surfaces. Position it with the
readable (mirror) side facing towards you. The disc will
automatically enter the disc compartment, or you can
press the OPEN button on the remote control to put the
disc into the disc compartment.
Once the disc is in the disc compartment, the player
starts reading the disc immediately.
DVD Mode
Press the SOURCE button on the back panel, or on the
remote control, to switch the unit to DVD mode.
Function Remote Button
Navigate to a folder or file / / /
Play / Pause
Stop
Skip Forward
Skip Backwards
Eject
Basic DVD Movie Playback
When a menu screen appears on the unit, press the /
/ / buttons, or the number buttons, to select the
chapter/track number, then press OK to confirm.
To stop playing and return to the menu screen, press the
TITLE or D.MENU button on the remote control.
Stopping Play
Press the button to stop playback.
NOTE: When the player is stopped, it records the point
on the DVD where STOP was pressed (RESUME
function). Press the button again to resume
playback from this point. When the disc is
ejected or STOP is pressed again, the RESUME
function will be cleared.
To Next Page
Loading...
