LION SG4000 User Manual

SMOKE GENERATOR
10
WWW.LIONPROTECTS.COM
4. USING YOUR SMOKE GENERATOR
Turn on the Smoke Generator with the on/off switch located at the back of the
unit. When the Smoke Generator is switched on, the heating element will begin
to warm up until it reaches the pre-set temperature. Upon reaching the pre-set
temperature, various optional settings are available to adjust how the smoke is
emitted from the machine.
As discussed, it is possible to begin making smoke as soon as the generator is warmed
up by pressing the SMOKE or CONT. buttons. It is also possible to change the smoke
output by adjusting the density using the UP and DOWN buttons. Releasing the
SMOKE button or pressing STOP will cease smoke generation.
The RUN button will operate a preset program. This can be used to conduct
training without manually controlling the Smoke Generator.
FIGURE 1: SG4000™ SMOKE GENERATOR USER INTERFACE

LION SG4000 Specifications

General

Brand	LION
Model	SG4000
Category	Fog Machine
Language	English