FIGURE 3: PROGRAMMING DISPLAY (AUTO)
FIGURE 5: SETUP DISPLAY
13
WWW.LIONPROTECTS.COM
OTHER SMOKE GENERATOR SETTINGS
The Smoke Generator offers additional menus that feature more settings
and options.
1. Press MENU to open the Programming Display, then use the UP and DOWN
buttons to select “Setup” in the bottom right corner. Press ENTER to change
to the Setup display seen below in Figure 5.
FIGURE 6: DMX DISPLAY
2. Use the UP and DOWN buttons to select “Power”, “Language”, or “Restore
Defaults” and press the ENTER button to change them. Use the UP and DOWN
buttons to select the desired setting and press ENTER again to conrm.
3. The maximum power setting is 1800 watts. Lower settings can be used to
reduce power consumption if necessary, but will decrease the smoke output.
4. Use the UP and DOWN buttons to select “DMX” in the bottom right corner.
Press ENTER to change to the DMX display seen below in Figure 6.
CONTINUES >