Two-PowerMaster installation
center rails electrified by two Power-
Masters. Ifthe light is offor dim, the two
PowerMasters are in phase. However,
if the light is brilliant or the voltmeter
reads 30 volts or more, one of the Pow-
erHouse or transformer plugs is "back-
wards." Reverse its wall plug at the out-
let (rotate it 180°).Check again; the light
should be off or dim. Repeat for each
PowerMaster junction. When you're fin-
ished, make sure every PowerMaster
COMM/CONV switch is set to Con-
ventional.
Basic TrainMaster
track plan concepts
Single-PowerMaster installation
12
Lionel TrainMaster
Multi-PowerMaster installation
Lionel TrainMaster
3
13
To Next Page
Loading...