Lipper Sway Command 1.5

To Next Page

lippert.com 432-LIPPERT (432-547-7378) CCD-0003928 Rev: 08.27.21

Sway Command

1.5

(AU) BY TRAILAIR

Installation and Owner’s Manual

(For Aftermarket Applications)

Table of Contents

Introduction ..............................................2

Causes of Sway .........................................2

Parts List ..................................................2

Resources Required .....................................2

Installation ................................................3

Mounting Controller ......................................3

Sway Command Wiring ..................................4

Sway Command

Light Pod Mounting ....................5

Sway Command

Compatible Tow Vehicle Brake

Control Modules ..........................................6

Prior to Operation ........................................6

Sway Command Controller Operation ..................7

Light Codes and Troubleshooting ......................7

Notes ......................................................8

The use of Sway Command

only supported/allowed for use

on caravans meeting product

specications and caravans with

approved brake control modules

(BCMs) and integrated caravan

brake control modules (ICBCMs).

See caravan requirements and

approved BCM and ICBCM Lists

at:

www.lippert.com/sway-command

• The Sway Command system installed on this caravan may be

incompatible with certain manufacturers’ brake controllers.

• Please refer to the website www.lippert.com/sway-command

for the most current list of brake controllers compatible with

Sway Command. Also, refer to your vehicle owner’s manual

for any further instructions on your vehicle’s brake controller

function.

• Failure to determine compatibility between your brake

controller, your tow vehicle and Sway Command may result

in the sudden loss of brake controller braking, which can

result in a loss of vehicle control and cause serious injury or

property damage.

• Do not submerge the controller. The Sway Command is not

designed to be submerged under water (Water Crossing).

Submersion will cause unwarrantable damage.

Sway Command

1.5

(AU) BY TRAILAIR

Installation and

Owner’s Manual

(For Aftermarket Applications)

Kit Part #Kit Part # DescriptionDescription

2020122271 Sway Command Kit

Sway Command Kit

Main Page

Need help?

Do you have a question about the Lipper Sway Command 1.5 and is the answer not in the manual?

Summary

Introduction

Causes of Sway

Lists common causes of caravan sway, such as improper loading or tire inflation.

Parts List

Resources Required

Lists tools and hardware needed for installing the Sway Command system.

Installation

Mounting Controller

Details how to properly mount the Sway Command controller unit onto the caravan chassis.

Standard Chassis Mounting

Provides step-by-step instructions for mounting the controller on standard caravan chassis.

Short Chassis Mounting

Offers guidance for mounting the controller on shorter caravan chassis, requiring a protective bracket.

Sway Command Wiring

Explains how to connect the main wiring harness to the Sway Command controller unit.

Sway Command Light Pod Mounting

Describes methods for mounting the light pod indicator on the caravan's A-frame or wall.

Sway Command Compatible Tow Vehicle Brake Control Modules

Prior to Operation

Outlines essential checks and adjustments before operating the Sway Command system.

Sway Command Controller Operation

Light Codes and Troubleshooting

Explains the meaning of light pod signals and provides troubleshooting steps for common issues.

Notes

Contains additional important notes and references for manual information.