EasyManuals Logo

Lippert Components Edge Awning User Manual

Lippert Components Edge Awning
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Rev: 07.24.19 Page 7
CCD-0002686
Maintenance
Resources Required
Over-spray of cleaning solution can cause eye and sensitive skin irritation. Flush affected area with clean
water and seek medical attention, if necessary. Wear eye protection and appropriate protective clothing
to avoid personal injury.
If the awning is retracted while wet, extend the awning and let it dry as soon as conditions allow before
retracting. This will help prevent the formation of mildew and add greatly to the life of the awning.
NOTE: Mildew does not form on the fabric itself, but on the accumulated dust, dirt and grime.
Periodically clean vinyl or woven acrylic fabric using a mixture of
¼
cup of dish soap and five gallons of
warm water.
1. Liberally apply the mixture on the top of the fabric and retract the awning for five minutes. This will
apply the mixture to the bottom of the fabric as well.
2. Extend the awning and hose off with fresh water.
3. Repeat if necessary.
4. Allow to dry before retracting.
Moving parts can pinch, crush or cut. Keep clear and use caution.
5 gallon bucket
Clean water
¼
cup of dish soap
Fabric Care

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components Edge Awning and is the answer not in the manual?

Lippert Components Edge Awning Specifications

General IconGeneral
BrandLippert Components
ModelEdge Awning
CategoryAccessories
LanguageEnglish

Related product manuals