Lippert Components Smart Jack 643589 User Manual

1
Smart Jack
™
model no. 643589
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001304lci1.com 574-537-8900 Rev: 04.18.18
Smart Jack
™
model no. 643589
Installation and Owner’s Manual
(FOR AFTERMARKET APPLICATIONS)
Smart Jack
™
model no. 643589
Installation and
Owner’s Manual
(For Aftermarket Applications)
Table Of Contents
Introduction ..............................................1
Safety Information ...........................................1
Resources Required .....................................1
Parts List ..................................................2
Preparation ...............................................2
Installation ................................................3
Operation .................................................4
Setting Hitch Height Memory ..................................4
Normal Operation ...........................................4
Return to Hitch Height Operation ..............................4
Auto Retract Operation .......................................4
Manual Operation ........................................5
Manually Unhitching from Tow Vehicle ..........................5
Manually Reconnecting to Tow Vehicle .........................5
Notes ......................................................6
Introduction
The Aftermarket Smart Jack features a high-efciency
motor, a new streamlined plastic shroud, and a new user
interface. These features, along with the single power lead
and the hitch height memory, give the end user a perfect
reason to replace the traditional tongue jack with a far
superior product.
Safety Information
Warning, Caution and Danger symbols indicate that an
installation procedure has a safety risk involved and may
cause death, serious injury or property damage if not
performed safely and within the parameters set forth in this
manual. Always wear eye protection when performing this
installation procedure. Other safety equipment to consider
would be hearing protection, gloves, and possibly a full
face shield, depending on the nature of the installation
procedure.
Resources Required
• Cordless or Electric Drill or Screw gun
• Appropriate Drive Bits
• 1/2” Socket
FAILURE TO ACT IN ACCORDANCE WITH THE
FOLLOWING MAY RESULT IN DEATH, SERIOUS INJURY,
TRAILER OR PROPERTY DAMAGE.
MOVING PARTS CAN PINCH, CRUSH, OR CUT. KEEP
CLEAR AT ALL TIMES.

Lippert Components Smart Jack 643589 Specifications

General

Model	643589
Category	Jacks
Manufacturer	Lippert Components
Voltage	12V DC
Travel	18 inches
Material	Steel
Color	Black
LED Indicator	Yes
Type	Electric
Mounting Type	Frame Mount
Features	Adjustable Footpads

Summary

Introduction

Safety Information

Resources Required

Parts List

Preparation

Installation

Operation

Setting Hitch Height Memory

Store vertical position for automatic retraction.

Normal Operation

Extend or retract jack using up/down arrows.

Return to Hitch Height Operation

Automatically retract/extend jack to stored height.

Auto Retract Operation

Automatically retract jack after reconnection to tow vehicle.

Manual Operation

Manually Unhitching from Tow Vehicle

Lower trailer and disconnect from tow vehicle using crank.

Manually Reconnecting to Tow Vehicle

Connect trailer to tow vehicle using crank.

Notes