Rev: 09.05.18 Page 1 CCD-0002116
TI-275
SOLERA
®
POWER AWNING HEAD REPLACEMENT
AWNINGS
Purpose
This document describes the removal and replacement of the Solera® Power Awning drive head and motor.
Resources Required
• 1-3 people (depending on task)
• Cordless or electric drill or screw gun
• Appropriate drive bits
• Zip ties
Product Change Notice
Original Power Awning Head
266146
Prior to July 2017
Current Power Awning Head
672049
After July 2017
Failure to secure the outer arms may result in personal injury, product or property damage. Pressure
from the gas strut can cause the outer arm to kick open, which could cause injury, product or property
damage.
Moving parts can pinch, crush, or cut. Keep clear at all times.
To Next Page
