Lippert Components SolidStep 3.0 - Adjust Step Transport Lock Mechanism

tv
5
lci1.com 574-537-8900 Rev: 02.10.20
CCD-0002548
SolidStep
®
3.0
Adjustable Latch
Installation and Owner’s Manual
(For Aftermarket Applications)
A
Fig.4
DO NOT ATTEMPT TO LOCK THE STEP IN PLACE,
AS THE LATCHING MECHANISM MAY NEED TO
BE ADJUSTED TO THE PROPER LEFT-RIGHT
ORIENTATION AND TIGHTENED IN POSITION BEFORE
USING THE TRANSPORT LOCK. ATTEMPTING TO
ENGAGE THE TRANSPORT LOCK WITHOUT PROPER
ADJUSTMENT MAY CAUSE DAMAGE TO THE
DOORFRAME OR STEP ASSEMBLY.
Adjust Transport Lock
1. If adjustment is required, loosen the 3 bolts (Fig.3A) on
either side of the adjustable transport lock. This allows
adjustment side-to-side in the latch mechanism.
DO NOT OVERTIGHTEN THE BOLTS. OVERTIGHTENING
THE BOLTS MAY DAMAGE THE THREADS OR CAUSE THE
BOLT HEADS TO BREAK OFF.
2. Once the latch mechanism is in the correct position, tighten
the bolts.
3. Once the transport lock has been adjusted, test its
functionality by shaking the step assembly to simulate
road vibration.
4. Engage and disengage the transport lock (Fig.4A) to ensure
the latch anges do not scrape against the doorframe.
A
Fig.3