Rev: 09.27.21 Page 13 CCD-0004071
Configure All Sensors
As an option to configuring sensors individually, all the sensors can be configured simultaneously.
1. Tap the arrow by Configure All Sensors (Fig. 27A).
2. The next screen features settings for all programmable limits (Fig. 28). Select the arrow to the right of
the setting to establish pressure and temperature limits for all the sensors.
Fig. 27
Fig. 28
A
Changing Units of Measure
To change the units of measure—to/from Imperial/Metric—go to the TYRE PRESSURE screen:
1. Tap the Settings icon (gear) (Fig. 9B).
2. From the SETTINGS screens, tap the Units option.
NOTE: The SETTINGS screen will display the current units of measure.
3. Tap the arrow right of the Units setting.
4. On the TEMPERATURE SCALE window, tap the desired unit of measure—°F–Fahrenheit or °C–Celsius.
NOTE: Unit of measure for temperature and pressure (psi/kPa) will change according to the selection made.
5. Tap the back arrow above the screen title to return to the SETTINGS screen.
NOTE: Displayed units of measure will change to match the newly selected units.
6. Tap the back arrow above the screen title to return to the HOME screen.
To Next Page
Loading...
