Rev: 09.27.21 Page 3 CCD-0004071
Fig. 1
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death, serious personal injury, severe product and/or property damage if not performed safely and
within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
Moving parts can pinch, crush or cut. Keep clear and use caution.
A
B
C
D
E
F
G
Tire Linc Components
Callout Description
A Repeater
B Repeater Dock; already installed in unit
C Stem Sensor
D Stem Sensor Tool; separates into top and bottom parts
E Lock Nut Wrench; tool to install lock nuts for optional theft deterrent
F O-ring; replace existing Stem Sensor O-rings when replacing Stem Sensor batteries
G Lock Nut; optional, used if installing as a theft deterrent
To Next Page
Loading...
