Lippert Flow Max 2022113192 - Page 6

6
lippert.com 432-LIPPERT (432-547-7378) Rev: 10.18.22
Flow Max
™
RV Toilet
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004230
Fig.5
Apply Caulk (If Necessary)
7. Attach the oor mounting caps onto the oor mounting
nuts. If the toilet is being installed in a shower stall (or other
wet area), apply a bead of caulk around the base of the
toilet to prevent water seepage under the base (Fig. 5).
5. Place the new oor mounting washers and then the new
oor mounting nuts onto the oor mounting T-bolts (Fig. 4).
Fig.4
Mounting Cap
Nut & Washer
T-Bolt
6. Tighten the oor mounting nuts. If a torque wrench
is available, tighten them to 30–40 in. lb. Do not over-
tighten. Alternate between sides when tightening to prevent
distortion. When the oor-mounting nuts are tight, the base
of the toilet should be securely attached and at against
the oor.