Lippert Flow Max 2022113192 - Operation; Adding Water to the Bowl

7
lippert.com 432-LIPPERT (432-547-7378) Rev: 10.18.22
Flow Max
™
RV Toilet
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004230
Operation
Adding water to an empty bowl helps prevent holding tank
(Fig.7A) odors from entering the living space. Adding water
is recommended prior to flushing solids and toilet paper.
Adding Water to the Bowl
Depress the flush pedal (Fig.7B) part way. Water flows into
the bowl while the flush ball (Fig.7C) remains closed.
NOTE: If the flush ball moves, let up on the flush pedal
slightly.
A
Fig.7
B
C
Fig.6
Water Supply Inlet
8. Connect the water supply line and torque the connection
to 30–40 in. lb. Do not over-tighten. If the water supply line
comes out of the oor, install a
½ in. (13 mm) elbow tting
or adapter (Fig. 6).
9. Turn on the water supply.
10. Flush the toilet several times and check for leaks. Refer
to “Flushing the Toilet”.
11. Test for leaks by lling the bowl with water and letting it
sit for an hour.