5
lippert.com 432-LIPPERT (432-547-7378) Rev: 10.18.22
Flow Max
™
RV Toilet
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004230
Fig.3
Flange Seal
Part number
NOTE: On some models, it is already installed.
3. Carefully position the toilet over the oor ange.
4. Align the holes in the toilet base with the oor mounting
T-bolts as you lower the toilet onto the oor ange. Be sure
the entire outlet drain of the toilet base ts inside the oor
ange outlet hole to avoid leaks.
NOTE: The toilet base might not rest evenly against
the floor yet. The floor flange seal will compress as you
complete the following steps (Fig. 3).
2. Install the new oor ange seal to the base of the toilet
with the part number facing down (Fig.3)
Installing the New Toilet
Follow these steps to install the new toilet:
1. Insert the new oor mounting T-bolts into the slots in the
oor ange (Fig. 2).
Fig.2
T-Bolts