Lippert Insight 2020112848 User Manual

1
lippert.com 432-LIPPERT (432-547-7378) Rev: 04.28.22
Lippert Insight Back-up
Camera LCD Display Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004028
Table of Contents
Introduction ............................................ 2
Safety ................................................... 2
Parts List ................................................ 2
Resources Required ................................... 2
Installation .............................................. 3
Operation
............................................... 4
Screen Menu ............................................ 5
Troubleshooting
....................................... 6
Notes .................................................... 7
Lippert Insight
Back-up Camera
LCD Display Kit
Installation and
Owner’s Manual
(For Aftermarket Applications)
Lippert Insight Camera LCD 7” Display Kit
Kit #Kit # DescriptionDescription
2020112848 Insight LCD 7” Display

Lippert Insight 2020112848 Specifications

General

Brand	Lippert
Model	Insight 2020112848
Category	Monitor
Language	English

Summary

Product Introduction

Safety Precautions

General Safety Warnings

Read and understand all instructions before operating. Failure to follow may result in severe injury or damage.

Specific Hazard Warnings

Caution symbols indicate risks of personal injury or property damage if not performed safely.

Parts Identification

Required Resources

Installation Steps

Initial Installation Setup

Includes unboxing, cleaning the mounting area, and removing protective film from the arm.

Mounting Arm Installation

Secure the mounting arm to the dashboard or windshield by pressing and tightening the latch.

Display Attachment and Adjustment

Attach the 7" display to the arm and adjust viewing angle using the display knob.

USB Power Connection

Connect the USB power cord to the display screen to provide power.

Operating the Display

Powering On and Initial View

Turn vehicle lights on to power the display and view the initial screen.

Menu Navigation Basics

Use the menu bars in the top left to navigate to the main menu.

Camera Pairing Process

Select 'Camera Pairing' and follow prompts to connect the camera to the display.

Camera Reset Procedure

Press and hold the camera reset button for 15 seconds, observing LED activity.

Screen Menu Options

System Information Display

View paired camera details, software versions, and access factory reset.

Device Settings Configuration

Configure sleep timer, signal strength, latency, and mobile device switching.

Camera View Adjustments

Adjust pan/zoom, parking grid, color, and mirror/invert settings for camera view.

Camera Pairing Management

View current pairing, remove cameras, or pair new cameras to the display.

Troubleshooting Common Issues

Display Connection Problems

Resolves issues where the display does not connect to the camera.

Camera Power Issues

Troubleshoots why the camera may not be powering up.

Blank Screen Resolution

Addresses blank screen issues after device connection.