Lippert Insight - Page 8

Rev: 08.19.21 Page 8 CCD-0004029
12. Confirm the details entered by tapping Confirm>> (Fig. 18A).
13. Set up a 4 digit security pin for the OneControl app (Fig. 19A).
Note: You can skip the Pin Setup by tapping Skip>> (Fig. 19B).
14. OneControl app setup is now complete, tap Continue to App>> (Fig. 20A).
15. Tap Camera (Fig. 21A) to open the back up camera view.
16. The app will now ask you to set up a password for connection to the back-up camera (Fig 22A). Enter a
password that is at 8 characters but no more than 20 characters in length.
17. Tap Update (Fig. 22B).
Fig. 18
B
Fig. 19
Fig. 20
A
Fig. 21
Fig. 22
A
A
A
A
B