Rev: 08.19.21 Page 9 CCD-0004029
Fig. 23
Camera
Fig. 24
Operation
Note: In order for the back up camera to function, the running lights must be ON. The camera requires
power in order to operate, and the running lights are the power source.
Note: The Lippert Back-up Camera is adjustable for acceptable visibility.
1. With a ladder, climb to location of the camera which is located on the back of unit (Fig. 23).
2. Rotate camera up or down to achieve the desired view (Fig. 24).
3. When in full view (Fig. 25), you can use your thumb and index finger to "pinch zoom" the main viewing
area of the camera (images displayed are for illustrative purposes only.)
4. While zoomed in, a small full view window will appear in the lower right corner of the screen (Fig. 26A).
A. Use your index finger to move around the main zoomed in view.
B. Double tap the full view window (Fig. 26A) to return to full camera view (Fig. 25).
5. The gear icon (Fig.25A) may be used to view the current password or change it if desired.
A. Input new password and tap Update (Fig. 27A).
B. Remove camera (Fig. 27B) will remove the camera connection to the OneControl app.
Fig. 25
Fig. 26 Fig. 27
A
B
A
A
Adhere to all product or tool safety labels and weight limits to prevent possible personal injury.
Do NOT exceed product/tool weight limits.
To Next Page
Loading...