Lippert Project 2000 Sliding Step - Table of Contents; Introduction

Rev: 02.08.22 Page 2 CCD-0004560
TABLE OF CONTENTS
Introduction 2
Safety 3
Operation 4
Wiring Diagram 5
Diagram 1 5
For Automatic Opening/Closing Kit 6
Maintenance 8
Troubleshooting 8
Emergency Operation 8
Resources Required 8
Notes 9
Introduction
The Project 2000 Sliding Step is a resistant to corrosion, lightweight, and has a thermal breaker in case of
high strain. The foot board is constructed of anodized aluminum with anti-slip rubber.
Disassembly of the Project 2000 Sliding Step voids the warranty. Contact Lippert to obtain replacement parts.
Additional information about this product can be obtained from lci1.com/support or by downloading the
free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on Google
Play™ for Android™ users.
iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/steps/
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.