Lippert Project 2000 Sliding Step - Wiring Diagrams; Diagram 1 Wiring

Rev: 02.08.22 Page 5 CCD-0004560
Wiring Diagram
Diagram 1
"A" connector
"B" connector
"A"
"B"
"A" CONNECTOR
Pin N° Description
1 Button common (+12 V)
2
--
3
--
4 D +
5
--
6 --
7 RETURN command
8
EXIT command
"B" CONNECTOR
Pin N° Description
1 (-GND)
2 motor -
3
motor +
4
+12 V dc
Step Open: Alert Indicator will be active when ignition is switched on.
NOTE: D+ should be a positive line that comes from the vehicle any time the parking brake is disengaged
or the ignition is engaged.
Common Button (+12V)
Command
RETURN
Command
EXIT
Command
EXIT
Command
RETURN
Common Button (+12V)
15A Fuse
+12V DC
adjustment screw
Alert Indicator circuit must be ltered to 12V.
Alert Indicator