EasyManua.ls Logo

Lippert Project 2000 Sliding Step - Product Operation; Step Operation Instructions

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev: 02.08.22 Page 4 CCD-0004560
Operation
Do not walk on the step until it is completely stopped. Do not interfere with the step while in
operation. Doing so may cause serious personal injury.
Make sure that children are away from the electric step when it is in motion.
1. Park the unit on level ground.
2. Press and hold the switch to extend the step. The motion will continue until the step is completely
extended when it will automatically stop. Release the switch.
3. Press and hold the switch to retract the step. The motion will stop when the step is completely
retracted. Release the switch.
NOTE: Some step models offer a safety feature which provides automatic closure of the steps when the
vehicle is started.

Related product manuals