Rev: 12.27.22 Page 12 CCD-0007002
Wiring Diagram
*Awning LED Lights
Battery,
Power Source
or Converter
15A Circuit Breaker
per RVIA Code
(OEM Supplied)
Wind Sensor
Awning Motor
Wind Senor
Harness
*Awning LED
light strip
connects to a
5amp latching
output on
Unity Control.
NOTE: Awning
motor leads
connect to a
15amp reverse
polarity
output on
Unity Control.
Lippert Unity Control
*Ground
*LED light switch and extend or
retract rocker switch connect
to the configurable input
connector on the Unity Control.
*Awning LED Light Switch
Awning
Manual
Extend
or
Retract
Rocker
Switch
NOTE: *If applicable, light kits are optional.
To Next Page
Loading...