Lippert Solera 3000WS Series - Extending and Retracting the Awning Using the OneControl App; Settings for Automatic Retraction Due to Wind Events

Rev: 12.27.22 Page 7 CCD-0007002
Extending and Retracting the Awning Using the OneControl App.
A. To extend or retract the awning, press and hold the Extend or Retract buttons on the home screen (Fig. 6A).
B. To automatically fully extend or fully retract the awning, double tap the appropriate icon on the
home screen (Fig. 7A).
Fig. 6
Fig. 7
A A
Settings for Automatic Retraction Due to Wind Events
To set a wind sensitivity level, tap the arrow (Fig. 8A) in the Awning Sensor cell on the home screen and
use the slider (Fig. 8C) to adjust the wind sensitivity level, or to toggle the automatic retraction due to wind
events on or off (Fig. 8B).
Fig. 8
B
C
A