Lippert Tire Linc 2020114605 - Tire Linc Display Configuration; Setting Display to Always On or Sleep; Selecting US or Metric Units

15
lippert.com 432-LIPPERT (432-547-7378) Rev: 01.28.22
Tire Linc
™
LCD Display
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004222
Display
1. Scroll down the SETTINGS screen and tap the arrow to
the right of Display (Fig.44A).
2. Select preferred entries on the DISPLAY screen,
including whether the system will always be on or will go to
sleep and if U.S. or metric terms are used (Fig.45).
3. Tap the back arrow (Fig.45A) to return to the
SETTINGS screen.
A
A
Operation
When Sensors are under pressure, data is transmitted to
the repeater when tires are:
• moving/rotating, every one minute;
• not moving/not rotating, every 15 minutes.
1. Tap a tire location (Fig.46) to launch its properties window
(Figs.47 and 48). Within the selected tire’s properties window,
various tire and sensor specications can be observed
and altered.
A. Pressure — posts the currently-sensed pressure of
the selected tire.
B. Temperature — posts the currently-sensed
temperature of the selected tire.
C. Battery Level — posts the current battery voltage of
the sensor’s battery.
Fig.44
Fig.45
Fig.46