18
lippert.com 432-LIPPERT (432-547-7378) Rev: 01.28.22
Tire Linc
™
LCD Display
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004222
Missing Stem Sensor
If a stem sensor becomes detached from the valve stem,
or an issue has occurred to where the repeater does not
receive data from a sensor for an extended period of
time, the repeater will flag the sensor as missing and the
tire’s readout button will display a “loss of communication”
symbol (Fig.50A).
Reattach the sensor, remove any metal obstructions
directly in front of the repeater or replace the sensor with a
new one to resolve the issue.
reset
No Power
If system is not working, check the in-line fuse to the
repeater dock to ensure the dock has power.
Reset LCD Handheld Display
1. Bend the end of a paper clip or use a similar tool that will
t into the reset hole in the LCD display (Fig.51).
2. Insert the tool then press and hold for two seconds to
reset the display.
A
Fig.50
Fig.51
To Next Page
Loading...