liquidarc Maxmig 210R

To Next Page

A Division of The Lincoln Electric Company (Aust) Pty Ltd A.B.N. 36 000 040 308

35 Bryant Street, Padstow, Sydney 2211, Australia

SAFETY DEPENDS ON YOU

LiquidArc machines are designed and built with safety in mind. However, your overall safety can be

increased by proper installation . . . and thoughtful operation on your part. Read and observe the general

safety precautions on page 2 and follow specific installation and operating instructions included in this

manual.

Most importantly, think before you act and be careful.

IMA 578BLA

July 2003

Maxmig 210i Part No 05-3210

Maxmig 210R Part No. 05-4210

Operating Manual

CODE MACHINE

70008 05-3210

70009 05-4210

Need help?

Do you have a question about the liquidarc Maxmig 210R and is the answer not in the manual?

Summary

ARC WELDING SAFETY PRECAUTIONS

ELECTRIC SHOCK can kill

Precautions against electric shock hazards during arc welding operations.

FUMES AND GASES can be dangerous

Guidelines for avoiding health risks from welding fumes and gases.

ARC RAYS can burn

Protecting eyes and skin from arc rays and spatter.

WELDING SPARKS can cause fire or explosion

Preventing fires and explosions caused by welding sparks.

GAS CYLINDER AND POWER EQUIPMENT SAFETY

Electrically Powered Equipment Safety

Safety precautions for electrically powered welding equipment.

Engine Powered Equipment Safety

WELDING, EMF & PACEMAKERS

Pacemakers and Welding Safety

Safety recommendations for welders with pacemakers and EMF exposure.

ELECTROMAGNETIC COMPATIBILITY (EMC)

1. INSTALLATION

1.2 Mains Supply Connection

2. OPERATING INSTRUCTIONS

2.2 Control Panel

Overview and function of the various controls on the machine's front panel.

5. MAINTENANCE

Safety Precautions

TROUBLESHOOTING

LIMITED WARRANTY

Statement of Limited Warranty