6
OPERATING THE BLISSLIGHTS SPRIGHT MOTION
The Blisslights Spright Motion operates in temperatures of -15°F to 90°F. There may be a
slight delay in projection intensity if operating in temperatures below 55°F. Please allow up
to 10 minutes for the light to warm up and reach its full projection intensity.
OPERATING THE TIMER
When you rst plug in your light, it will automatically turn on and will operate at its fastest
rotation speed. It will continue on for 6 hours, or until it is shut o using the remote control.
Using the remote control to shut o the unit also disables the timer, and every time it is
turned on, it will reset the timer.
The Blisslights Spright Motion has a built-in timer that is designed to automatically shut o
after 6 hours of operation. It will go into sleep mode for 18 hours, and resume its operation
thereafter. The rotation speed will remain at the same setting for every timer cycle, unless
you unplug the unit, which will return it to the fastest rotation speed.
Laser Classication Class 2M
Laser Power Less than 1 mW per beamlet,
Laser Wavelength 660nm - Red, 532nm - Green, 445nm - Blue
Laser Optics Single-source holographic optical element
Power Consumption <9W (Green), <2W (Red/Blue)
110/120V AC with manufacturer provided
power supply
Power Input (Device) 12V AC or DC
Operation Indoor/Outdoor
Operating Temperature -15°F to 90°F ( -26°C to 32°C)
Projection Coverage Up to 50ft x 50ft
Maintenance Maintenance Free
144mm x 200mm x 128mm, 720g
PRODUCT SPECIFICATIONS
5.6in x 7.9in x 5in, 1.6lbs
Cord Length: 6m / 20ft
Limited One Year
Warranty
Dimensions
Power Input
To Next Page
Loading...