Lissmac MULTICUT 800 - Page 37

37
Translation of the original declaration of conformity
This EC Declaration of Conformity is valid for the following machine:
LISSMAC Floor Cutter MULTICUT 800.
This declaration relates exclusively to the machine in the state in which it was
placed on the market, and excludes components which are added and/or
operations carried out subsequently by the final user. It is confirmed that the
machine conforms to the relevant provisions of Directive 2006/42/EC.
Manufacturer:
LISSMAC Maschinenbau GmbH
Lanzstrasse 4
D-88410 Bad Wurzach
The technical documentation retained by
LISSMAC Maschinenbau GmbH, Lanzstrasse 4, D-88410 Bad Wurzach.
Machine
description:
The floor cutter is intended for cutting grooves into concrete or asphalt.
MULTICUT 800 G MULTICUT 800 GH
Cutting depth (max.) 315 mm (515 mm) 315 mm (515 mm)
saw blade (max.) 800 mm (1200 mm) 800 mm (1200 mm)
traction drive forward 0-60 m/min 0-60 m/min
traction drive backward 0-25 m/min 0-25 m/min
Output power max. 44 kW / 60 PS 44 kW / 60 PS
Saw blade speed 1550 / 970 1/min 1550 / 970 1/min
Saw blade speed optional 2500 / 1550 1/min 2500 / 1550 1/min
Guaranteed noise power
level:
112 dB 112 dB
Measured noise level LwA: 113 dB 113 dB
Weight 935 kg 1070 kg
Harmonised
standards:
EN 13862:2010-03
EN ISO 12100 Corrigendum 1:2013-08
DIN EN 60204-1; VDE 0113-1:2007-06
Legally binding
representative:
LISSMAC Maschinenbau GmbH
Gewerbepark West
Lanzstrasse 4
88410 Bad Wurzach
Tel.: +49 (0) 7564 / 307 - 0
Fax: +49 (0) 7564 / 307 - 500
Mail: lissmac@lissmac.com
www.lissmac.com
Bad Wurzach, 01.02.2016
...........................................
ppa. Benjamin Mayer
(Head of Development Construction Technology)