25
7. Maintenance
7.1 Service
first time daily weekly monthly annually
when the warning
indicator lights up
every "x" operating
hours
Change hydraulic oil (see 6.4)
every 2 years – annually for exhaust
Check hydraulic hoses and screwed
connections for leaks and damage
20 h
X
Lubricate the lubrication points (see 6.3)
X X X
Check oil level in hydrostatic
Check the drive (see 6.7)
X
Change oil in the bevel gear drive
(SAE 90 fully synthetic) (see 6.5)
X
Check the safety equipment
(see 2.2)
X
Check the V-belt tension (see 6.9)
X
Perform a cooling water check
(see 6.8)
X
Oil change on the feed drive
(see 6.6)
every 2 years
Diesel motor, see Kubota operating manual.
Attention! Check all screw connections after 20 operating hours!
Note
Check that the diesel motor is in a horizontal position when checking the motor oil level.
Please follow the operating manual of the engine manufacturer (which is included with each new machine),
especially pay attention to the safety and maintenance procedures!
To Next Page
Loading...