9
1.7 Transport
1.7.1 Only use lifting gear and load carrying equipment with sufficient lifting
capacity during loading work!
1.7.2 Name expert instructors for the lifting process!
1.7.3 Lift the machine only according to the instructions in the operating
manual (using attachment points for load-bearing systems, etc.), and with
proper lifting accessories!
1.7.4 Only use suitable transport vehicle with sufficient load capacity!
1.7.5 Secure loads reliably. Use suitable attachment points!
1.7.6 Even when moving the machine only for a short distance, disconnect the
machine from the power mains! Before restarting the machine, connect it
to the power mains correctly!
1.7.7 When recommissioning, follow the operating manual!
1.7.8 You may only move the floor cutter when the front part is slightly lifted.
To Next Page
Loading...