l
45
2
Attach Corner Mount Bracket to Wall Box Plate using included
Mounting Harware Screws. Use all four available holes to ensure a
secure attachment.
Attach Corner Mount Bracket
3
Attach Tilt Arm “A” to Corner Mount Bracket. Determine correct placement of Tilt Arm “A” by holding Radiator up to Corner
Mount Bracket and determining desired position in corner.
Attach Tilt Arm “A”
LA-140 – Mounting your Radiator
4
Attach Tilt Arm “B” to Swing Arm of radiator (swing arm comes attached to rear of radiator) using included Mounting Hard-
ware Screws. Any of the seven holes in Swing Arm can be used for this connection.
Attach Tilt Arm “B”
To Next Page
Loading...
