15
www.LiteGait.com
1-800-332-9255
14.) Tighten knobs to secure yoke in
position.
13.) Pull spring pin to lower the yoke on
the post.
12.) Attach post plate by tightening
knobs on the back of the handle bars to
secure in position.
11.) Loosen the knobs on handle bar
assembly to remove back plate and
position handle bars on post
Feel free to call 1-800-332-9255 Extension 7104 for Mobility
Research Support during this assembly.
NOTE: Your LiteGait® may look different than images above
Section intentionally left blank.
Section intentionally left blank.
To Next Page
Loading...