LiteOn EVO600043S2D2E20F - Page 65

62
Parameter
Name
Description
Setting Range
Current (Stationary
Auto-Tuning)
After the motor output power and rated current
are set in t1-02 and t1-04, this parameter will
automatically display the no-load current of a
standard motor. The no-load current must be
entered according to the motor test report.
Min.: 0.0 A
Max.: t1-04( Max ∶ 0 to
2999.9)
t1-12
Motor Auto-Tuning
Setting
Enables or disables Auto-Tuning when A1-02=0
to 3
0 : Disabled
1 : Enabled
Default∶ 0
Range: 0, 1