little mule LMSC Series User Manual

The use of any hoist presents some risk of
personal injury or property damage. That risk
is greatly increased if proper instructions and
warnings are not followed. Before using this
hoist, each operator should become
thoroughly familiar with all warnings,
instructions, and recommendations in this
manual.
Retain this manual for future reference
and use.
Forward this manual to the hoist operator.
Failure to operate the equipment as directed
in the manual may cause injury.
Should you have any questions regarding this
product, please call Little Mule at
(800) 477-5003.
Before using the hoist, fill in the information
below:
Model No.
Serial No.
Purchase Date
F ollow all instructions and
warnings for inspecting, maintaining
and operating this hoist.
3/4 to 6 Ton
Model Numbers
LMSC1500
LMSC3000
LMSC6000
LMSC12000
Operating, Maintenance &
Parts Manual
LMSC680
LMSC Series
Ratchet Lever
LMSC.qxd 7/11/2002 4:19 PM Page i
www.stlcrane.com
McLaughlin Hoist & Crane
(636) 343-9700
Authorized Sales & Service - McLaughlin Hoist & Crane - For Parts or Serivce Call (636) 343-9700

little mule LMSC Series Specifications

General

Brand	little mule
Model	LMSC Series
Category	Chain Hoists
Language	English

Summary

LMSC Series Ratchet Lever Hoist Manual

Introduction and Key Information

Manual introduction, safety warnings, and contact details for questions and service.

Safety Precautions

Hoist Specifications

Application Information

Guidance on initial inspection, lubrication, load chain examination, and support structure.

Safety Information

Operation

Hoisting and Lowering

Instructions for operating the hoist in upward and downward directions.

Free-Chaining

Procedure for quick, large adjustments of load chain length without load.

Resetting the Hoist

Methods to re-engage the brake system after free-chaining or load application.

Maintenance

Load Chain Care

Guidelines for inspecting and replacing worn, elongated, or damaged load chains.

Hook Inspection and Replacement

Procedure for inspecting hooks for elongation, bending, or damage and replacement criteria.

Optional Overload Protection

Trouble Shooting

Inspection and Maintenance Check List

Inspection Frequency Guidelines

Details on frequent and periodic inspection schedules for hoist components.

Inspector's Report

Recommended Lubrication Schedule

Parts List

.75 & 1.5 Ton Model Parts

List of part numbers for .75 and 1.5 ton capacity lever hoist models.

3 & 6 Ton Model Parts

List of part numbers for 3 and 6 ton capacity lever hoist models.

Warranty Information

Certification Statement

Statement certifying hoist testing at 125% of rated capacity and inspection.