2
SAFETY PRECAUTIONS (Continued)
1. Maintain a firm footing or be otherwise secured when operating the hoist.
2. Check brake function by tensioning the hoist prior to each lift or pulling operation.
3. Use hook latches. Latches are to retain slings, chains, etc. under slack conditions only.
4. Make sure the hook latches are closed and not supporting any parts of the load.
5. Make sure the load is free to move and will clear all obstructions.
6. Avoid swinging the load or hook.
7. Avoid lever “fly-back” by keeping a firm grip on the lever until operating stroke is completed
and the lever is at rest.
8. Inspect the hoist regularly, replace damaged or worn parts, and keep appropriate records of
maintenance.
9. Use the hoist manufacturer’s recommended parts when repairing the unit.
10. Lubricate load chain per hoist manufacturer’s recommendations.
11. NOT use the hoist load limiting or warning device to measure load.
12. NOT operate except with manual power.
13. NOT permit more than one operator to pull on lever at the same time. More than one
operator is likely to cause hoist overload.
14. NOT allow your attention to be diverted from operating the hoist.
15. NOT allow the hoist to be subjected to sharp contact with other hoists, structures, or
objects through misuse.
16. NOT adjust or repair the hoist unless qualified to perform such adjustments or repairs.
17. NOT expose the unit to high temperatures in excess of 200°F.
Improper operation of a hoist can create a potentially
hazardous situation which, if not avoided, could
result in minor or moderate injury. To avoid such a
potentially hazardous situation, the operator shall:
TABLE OF CONTENTS
Safety Precautions...........................................................................................................1-2
Hoist Specifications.............................................................................................................3
Application Information........................................................................................................3
Safety Information ...............................................................................................................4
Operation ............................................................................................................................5
Maintenance........................................................................................................................6
Optional Overload Protection..............................................................................................7
Trouble Shooting .................................................................................................................8
Inspection & Maintenance Check List.................................................................................9
Inspector’s Report.............................................................................................................10
Lubrication Schedule ........................................................................................................10
Replacement Parts List for .75 & 1.5 Ton Models........................................................11-12
Replacement Parts List for 3 & 6 Ton Models..............................................................13-14
Warranty .............................................................................................................Back Cover
To Next Page
Loading...
