Need help?Do you have a question about the Living Spaces revive REV3500 and is the answer not in the manual?
Essential safety warnings for using the adjustable bed, including environmental and user restrictions.
Details on warranty voiding conditions, motor duty cycle, operating guidelines, and weight limits.
Information regarding radio frequency compliance and user operation regulations.
Lists and identifies all essential parts included with the adjustable bed base.
Lists accessories that are not included but can be purchased separately.
Diagram labeling key electronic components of the REV3500 adjustable base.
Illustrates how the remote, control box, and motors connect within the adjustable base system.
Instructions for unpacking, setting up the frame, and attaching the bed legs.
Steps for flipping the foundation, installing retainer bars, and ensuring battery installation.
Identifies each button on the remote and its primary function.
Details on adjusting positions, one-touch presets, and massage features.
Steps to install the Revive app, pair the base, and control the bed via smartphone.
Guide to saving personalized head and foot positions using the remote.
Instructions for pairing the wireless remote to the adjustable base if needed.
Procedure for modifying TV, Zero-G, and Anti-Snore preset positions.
How to reset all preset positions back to their original factory configurations.
Instructions for using 9V batteries as a backup power source during outages.
Steps to link two bases for synchronized operation using a single remote.
Instructions for using a sync cable to synchronize two adjustable bed bases.
Lists the necessary components for installing headboard brackets.
Step-by-step guide for attaching headboard brackets to the adjustable base.
Solutions for when the remote is on but the bed does not respond.
Troubleshooting steps for when none of the base's functions are working.
Guidance on resolving issues where the wireless remote does not power on.
Solutions for when the head or foot sections do not return to the flat position.
Tips for addressing minor interference during head and foot lift operations.
Explanation that clicking sounds from lift motors are normal during operation.
The REV3500 Wireless Adjustable Base, branded "revive by LIVING SPACES," is a sophisticated foundation designed to enhance comfort and convenience in a residential bedroom setting. This adjustable base allows users to customize their sleeping and lounging positions through a wireless remote control and offers a range of features aimed at improving the overall bed experience.
The primary function of the REV3500 is to provide an adjustable platform for a mattress, allowing the head and foot sections to be independently raised or lowered. This adjustability supports various activities such as sleeping, reading, watching TV, or simply relaxing in bed. The base is equipped with multiple motors: a head motor and a foot motor for adjusting the bed's position, and separate head and foot massage motors for therapeutic vibration. An LED light is integrated into the base, likely for under-bed illumination. The system is powered by a power supply and power cord, with an emergency battery backup feature to ensure functionality during power outages. USB ports are also included, providing convenient charging for electronic devices.
The REV3500 comes with a comprehensive wireless remote control that allows for easy adjustment of the bed's positions and activation of its various features. The remote includes dedicated buttons for:
The base supports programmable positions, allowing users to save their favorite custom head and foot adjustments. To set a custom position, the user first adjusts the bed to the desired position, then presses and holds the "FLAT" button, followed by the "M" (Memory Position) button for 5 seconds until two beeps are heard. This saves the new position. Existing preset positions (TV, ZG, Anti Snore) can also be modified by adjusting the bed to a new desired position, then pressing and holding "FLAT" followed by the respective preset button (TV/ZG/Anti-Snore/M) until two beeps sound.
The REV3500 can also be controlled via a smartphone app called "Revive Control." Users can install the app from the APP Store (IOS) or Google Store (ANDROID). After plugging the base into a power source and turning on Bluetooth on their phone, users can open the app, refresh the device list, and select their base's control box code to connect. The app provides a control center with options for position adjustment, massage, and preset positions, mirroring the remote's functionality.
For split bases (e.g., King or California King sizes), the REV3500 offers two methods for synchronization:
Optional headboard brackets (not included) can be installed to attach a headboard to the adjustable base. The installation involves securing the headboard brackets to the bed frame using bolts and nuts, then assembling T-Brackets to the headboard brackets, and finally attaching the headboard to these plates. A 1/2" (13 mm) socket and crescent wrench are required for this process.
In the event of a power outage, the REV3500 includes an emergency battery backup system. This system requires two 9V batteries (not included) to be installed into the power supply. To install, the power cord is unplugged, the cover on the underside of the power supply is removed, batteries are inserted, the cover is replaced, and the power cord is plugged back into the wall. This allows for temporary operation of the base to return it to a flat position, but it is not intended for repeated movement or normal operation. Once power is restored, the batteries should be removed, and the power cord reconnected for normal use.
The manual provides a troubleshooting guide for common issues, such as the remote illuminating but the bed not activating, no features activating, the remote not illuminating, or the bed not returning to a flat position. Solutions include checking power connections, reprogramming the remote, replacing batteries, checking for obstructions, and ensuring proper bed positioning relative to walls or headboards. A clicking noise during operation is noted as normal for the lift motor relays.
The REV3500 comes with a 2-year warranty covering parts and labor on the entire base. Users are warned against opening or tampering with the control box, motors, or remote (except battery compartments), as this will void the warranty. The motors have a duty cycle rating of 2 minutes of continuous operation within an 18-minute period (approximately 10%), and exceeding this can shorten the foundation's life and void the warranty. The product is designed for residential use only and is not approved for hospital use. It has a weight limit of 850 pounds, including the mattress and bedding, provided the weight is evenly distributed. Exceeding this limit can cause damage and void the warranty. Safety warnings also advise against outdoor use, use near explosives, and caution with oxygen equipment, liquids, and ensuring no persons or pets are under the bed during operation. Excessive use of massage motors (over 30 minutes) can cause overheating and damage, so a 30-minute rest period is recommended between uses.
General| Category | Indoor Furnishing |
|---|---|
| Type | Recliner |
| Weight Capacity | 300 lbs |
| Massage | Yes |
| Zero Gravity Preset | Yes |
| USB Ports | Yes |
| Wireless Remote | Yes |
| Product Name | revive REV3500 |
| Assembly Required | Yes |
To Next Page