Living Spaces revive - User Manual

Need help?

Do you have a question about the Living Spaces revive and is the answer not in the manual?

Summary

Safety & Warranty Warnings

General Safety Precautions

Key safety warnings and precautions for using the adjustable bed, including outdoor use and explosives.

Warranty & Product Limitations

Details on warranty voiding, motor duty cycle, and product rating for residential use.

Weight Capacity

Specifies the maximum weight limit for the adjustable bed foundation and its distribution.

Installation Guide

Unpacking and Initial Setup

Steps for opening the shipping carton, lifting the bed frame, and preparing for leg installation.

Leg and Power Connection

Instructions for attaching the bed legs and connecting the power supply and remote control cords.

Final Positioning and Retainer Bar

Guidance on flipping the foundation and securing the mattress retainer bar to the frame.

Synchronizing Two Bases

Preparation for Synchronization

Ensures both bases are plugged in and in the flat position before linking them.

Connecting for Synchronized Control

Instructions on using the splitter cable to connect two bases to a single remote for joint operation.

Headboard Bracket Installation

Component Identification

Lists the necessary components for installing headboard brackets, including brackets and hardware.

Bracket Attachment Steps

Step-by-step instructions for attaching headboard brackets and T-brackets to the adjustable bed frame.

Troubleshooting Common Issues

Base Unresponsive

Solutions for when no features of the base activate, including connection and power checks.

Head Section Movement Problems

Troubleshooting for the head section elevating but not returning to flat, or being too close to the wall.

Remote Control Issues

Guidance on resolving problems where the remote control does not operate the adjustable base.

The REV1.0 Wired Adjustable Base by Living Spaces is a power foundation designed for residential use, offering adjustable head and foot sections for enhanced comfort. This owner's manual provides detailed instructions for installation, operation, and troubleshooting, along with important safety and warranty information.

Function Description:

The REV1.0 Wired Adjustable Base allows users to adjust the head and foot sections of their bed to various positions using a wired remote control. This functionality is designed to provide personalized comfort for activities such as reading, watching TV, or sleeping in an elevated position. The base is equipped with motors that facilitate smooth and quiet adjustments. For larger bed sizes like King or Cal King, two Twin XL or Cal King Split bases can be placed side-by-side and synchronized to operate jointly with a single remote, or independently with their own remotes. The foundation also includes a retainer bar to keep the mattress in place during adjustments. Optional headboard brackets are available for attaching a headboard to the adjustable base.

Important Technical Specifications:

Product Rating: The motors are designed for intermittent use, with a duty cycle of approximately 10%. This means they should not operate continuously for more than 2 minutes within an 18-minute period. Exceeding this rating can shorten the life expectancy of the foundation and may void the warranty.
Weight Limits: The product is rated to support weights up to 850 pounds, inclusive of the mattress and bedding. This weight must be evenly distributed across the foundation. The power foundation is not designed to support or lift this amount in the head or foot sections alone. Exceeding this weight restriction can cause damage to the bed, injury, and will void the warranty.
Radio Frequency: The device operates at 2.4 GHz and complies with FCC Part 15 rules, ensuring it does not cause harmful interference and accepts any interference received.
Power Supply: The base requires an external power supply box, which connects to the input power cord from the control box on the underside of the base and then to a wall outlet.
Legs: The base comes with 12-inch legs. Six legs are used for most sizes, while King/CK sizes use seven legs.
Warranty: The product comes with a 2-year warranty covering parts and labor on the entire base. The warranty is void if the control box, motors, or remote are opened or tampered with (excluding battery compartments).

Usage Features:

Wired Remote Control: The base is operated by a wired remote with dedicated buttons for raising and lowering the head section.
Easy Installation: The installation process is designed for two people and involves attaching the legs, connecting the power cords, and securing the mattress retainer bar.
Synchronization for Dual Bases: For Twin XL or Cal King Split bases, a splitter cable (included with these sizes) allows two bases to be connected and controlled by a single remote, enabling joint movement.
Headboard Compatibility (Optional): Headboard brackets are an optional accessory that allows users to attach a headboard to the adjustable base. Installation requires a 1/2" (13 mm) socket and crescent wrench.
Safety Guidelines: Users are advised to keep moving parts free of obstruction, distribute body weight evenly, and avoid placing entire weight on head or foot sections during repositioning. The bed should not be used outdoors or near explosives, and caution should be exercised with liquids to prevent spills. Children and individuals with disabilities should not operate the bed without adult supervision, and no person or pet should be under the bed during operation.

Maintenance Features:

Troubleshooting Guide: The manual includes a troubleshooting section to address common issues such as the base not activating, the head section not returning to flat, or the remote not operating. Solutions typically involve checking wired connections, resetting electrical components by unplugging and replugging the power cord, checking for obstructions, or verifying the power outlet.
Cleaning: In case of liquid spills, users are instructed to unplug the bed immediately, clean up the spill, and allow the area to dry thoroughly before using the electric controls again.
Regular Checks: It is recommended to ensure all wired connections are secure below the bed base and that the power cord is properly plugged into the wall outlet if any operational issues arise.