Living Spaces MADISON PARK

To Next Page

Pre-assembly:

Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

Important safety instructions:

Please carefully read all instructions before assembling.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Assembly Procedures:

Step 1. Assemble the stool on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.

1) Attach one leg (P2) to the bottom of chair top (P1) using bolts (H1), lock washers (H2) and flat washers (H3).

2) Insert one stretcher (P3) between the two legs (P2), then attach leg (P2) to the bottom of chair top (P1) using

bolts (H1), lock washers (H2) and flat washers (H3) as shown below.

(H1)x4

(H2)x4

(H3)x4

(H4)x1

Need help?

Do you have a question about the Living Spaces MADISON PARK and is the answer not in the manual?

Summary

Important Safety Instructions

Pre-assembly

Assembly Procedures

Step 1. Assemble the stool on a flat, soft surface

Attach one leg (P2) to chair top (P1) and insert one stretcher (P3) between two legs (P2).

Step 2. Insert front stretcher and attach third leg

Attach front stretcher (P4) between two legs (P2), then attach the third leg (P2) to chair top (P1).

Step 3. Secure stretchers and legs

Insert two stretchers (P3) to legs (P2), attach last leg (P2), and tighten screws (H5).