Loadrite LP950 - 2 Printer Controls and Indicators; Function of Buttons; Function of Indicators

2
LOADRITE™ LP950 Printer User Guide
2 PRINTER CONTROLS AND
INDICATORS
The Loadrite Printer has two control buttons and three associated
indicator lights on the operator control panel.
2.1 FUNCTION OF BUTTONS AND INDICATORS












 TestPrintFunction
If the Paper Feed button is momentarily depressed while holding
the On Line button, the printer will print a test print. After printing,
the printer will be left in the Off Line state and the On Line button
must be pressed before the printer will operate.
ICON NAME DESCRIPTION
or
On Line Button
The printer can be switched
'ON LINE' and 'OFF LINE' (i.e.
print data or don't print data)
by successively pressing the
ON LINE button. When the
printer is 'ON LINE' the
associated indicator light will
be on.
or
Paper Feed
Button
This button is used to fast
feed the paper out of the
printer. It may be used when
required during paper loading.
or
Paper Out
Indicator
When illuminated, this
indicates that the printer is out
of paper and a new paper roll
should be loaded to avoid
losing printed information.
Ready Indicator
(LP950C only)
When illuminated this
indicates the printer is ready
to accept data for printing.
This indicator goes off when
the printer is out of paper, or if
the printer is “OFF LINE” or
the printer is busy printing and
is unable temporarily to accept
any more data.