EasyManua.ls Logo

Lochinvar AWH0400NPM User Manual

Lochinvar AWH0400NPM
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service Manual
Models: 400 - 1000
Series 100 & 101
This manual must only be used by
a qualified heating installer / service
technician. Read all instructions,
including this manual and the Armor
Installation and Operation Manual,
before installing. Perform steps in the
order given. Failure to comply could
result in severe personal injury, death,
or substantial property damage.
󰖱 WARNING
Save this manual for future reference.
100332297_2000589045_Rev A
LOW LEAD CONTENT
Question and Answer IconNeed help?

Do you have a question about the Lochinvar AWH0400NPM and is the answer not in the manual?

Lochinvar AWH0400NPM Specifications

General IconGeneral
BrandLochinvar
ModelAWH0400NPM
CategoryWater Heater
LanguageEnglish

Summary

Please Read Before Proceeding

2 Maintenance

2 Maintenance (continued)

General Safety and Maintenance Warnings

Critical safety precautions and warnings for performing maintenance.

Cleaning the Heat Exchanger

Detailed procedure for cleaning the heat exchanger surfaces.

Water Heater Relief Valve Inspection

Testing and replacement procedures for the safety relief valve.

3 Troubleshooting

Before Troubleshooting Preparations

Required tools and initial system checks before diagnosing faults.

Check Control Module Fuses

Procedure for inspecting and replacing blown control module fuses.

3 Troubleshooting (continued)

Troubleshooting Chart - No Display and Burner Operation

Diagnosing faults related to no display and no burner operation.

Checking Temperature Sensors

Sensor resistance values at various temperatures for diagnostics.

Troubleshooting Chart - Noisy System and Pump Operation

Diagnosing faults related to noisy operation and no pump operation.

Troubleshooting Chart - Pressure Switch Faults

Diagnosing gas pressure and air pressure switch faults.

Troubleshooting Chart - Anti-cycling and Ignition Faults

Diagnosing anti-cycling and flame failure ignition faults.

Troubleshooting Chart - No Flame Running Fault

Diagnosing faults related to loss of flame signal during operation.

Troubleshooting Chart - Flame Sequence and High Limit Faults

Diagnosing flame detection and high limit trip faults.

Troubleshooting Chart - Fan Speed Faults

Diagnosing faults related to fan speed being too low or too high.

Troubleshooting Chart - Modulation and Sensor Issues

Diagnosing faults related to unit modulation and sensor readings.

Troubleshooting Chart - Relief Valve Opening

Diagnosing faults related to relief valve opening.

Troubleshooting Chart - Flow and Blocked Drain Faults

Diagnosing flow switch and blocked drain switch faults.

Related product manuals