To Next PageTo Next Page
Need help?Do you have a question about the Lochinvar Armor 100 Series and is the answer not in the manual?
General| Brand | Lochinvar |
|---|---|
| Model | Armor 100 Series |
| Category | Water Heater |
| Language | English |
Details the water heater display, including panel readouts and buttons.
Illustrates and lists all control module inputs and options for the water heater.
Details the control module outputs and options, including connected components.
Explains how the water heater operates, its control module, and access modes.
Guides on accessing programming modes and navigating the display panel menus.
Lists SMART TOUCH control module parameters and their access levels for users and installers.
Covers initial setup procedures for clock, date, and temperature units.
Details parameters that can be viewed and modified on the control panel.
Explains various control modes like BMS, ModBus, and Cascade operations.
Describes parameters related to circulation pump operation and system integration.
Provides schedules and procedures for annual maintenance and startup.
Procedure for addressing issues reported by the water heater owner.
Guidelines for inspecting the area around the water heater for safety.
Instructions for inspecting the internal components of the water heater.
Procedure for inspecting and cleaning the condensate trap and line.
Checks for proper condition, blockage, and sealing of the flue vent and air piping.
Steps to verify water system components, pressure, and air vents.
Guidance on checking the function and type of expansion tanks.
Procedures for inspecting, testing, and replacing the relief valve.
Instructions for inspecting, cleaning, or replacing ignition and flame sense electrodes.
Procedure for inspecting ground wire continuity and connections.
Steps to inspect all water heater wiring for condition and attachment.
Verifying and adjusting control module and external limit control settings.
Guidance on performing start-up procedures and operational checks.
Procedure for inspecting the burner flame for satisfactory operation.
How to check the flame signal reading on the display.
Advice on discussing maintenance and operation with the owner.
Detailed steps for cleaning the water heater heat exchanger.
Guidance on checking the temperature difference (Delta T) across the heat exchanger.
Information on circulator lubrication requirements.
Procedure for checking and replacing control module fuses.
How to test and compare temperature sensor resistance values.
Steps for performing combustion analysis and checks.
Instructions for adjusting the gas valve for optimal combustion.
