11. Controls intended to be used to reset an operator after 2 sequential activations of the entrapment
protection device or devices must be located in the line of sight of the gate, or easily accessible
controls shall have a security feature to prevent unauthorized use. Never allow anyone to hang on or
ride the gate during the entire travel of the gate.
12. Each gate opener is provided with two safety warning placards. The placards are to be installed on
the front and back of the gate where they are plainly visible. The placards may be mounted using
cable ties through the four holes provided on each placard.
All warning signs and placards must be installed where visible in the area of the gate.
13. To AVOID damaging gas, power, or other underground utility lines, contact underground utility
locating companies BEFORE digging.
SAVE INSTRUCTION.
To Next Page
Loading...
