Logan F300-1 - User Manual

Description
The model F300-1 Studio Joiner has
been designed to economically and
precisely drive V-nails into moulding
corners to securely join them
together. Simple and easy to use,
this complete system produces
strong, tight corners for high quality
professional results. Accepts
mouldings up to 2
1
/2" (64mm).
Producing professional quality pic-
ture frames is now easier than ever.
Instruction Manual
Studio
Joiner
P ICT U R E F R A M I NG
www.logangraphic.com
Model F300-1
Reference Part No. L956N rev.1
Rev. 9/14
L956NStudio Joiner manual R1_08.qxd:Studio Joiner 1_4_05.qxd 1/4/10 11:17 AM Page 1

Summary

Studio Joiner Product Description

Studio Joiner Component Identification

Studio Joiner Parts List

Studio Joiner Assembly Procedure

Studio Joiner Preparation

V-nail Selection and Quality

Guides on selecting V-nail type, size, and quantity for optimal joining.

Moulding Clamping and Gluing

Steps for marking, gluing, and securely clamping moulding for joining.

Moulding Spacer Usage

Instructions on using the spacer for proper moulding support during V-nailing.

Adjusting Beam Height for V-Nailing

Steps for setting the correct beam height using the depth gauge.

Studio Joiner Operation

Loading V-Nails

How to properly position and load V-nails onto the magnetic tip.

Driving V-Nails into Corners

Step-by-step guide on driving V-nails into moulding corners correctly.

Joining Multi-Sided Frames

Specific instructions for assembling frames with more than four sides.

Studio Joiner Trouble Shooting

Logan F300-1 Specifications

General

Brand	Logan
Model	F300-1
Category	Power Tool
Language	English