Logik L23IP11 User Manual

25
GB
Customising TV Settings
Extras Setting
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically
when receiving a digital signal. Time must be set before using Sleep Timer function.
1. Press the Menu button and then press the
buttons to select the
EXTRAS menu.
2. Press the
buttons to select Sleep Timer and then press the OK
button.
3. Press the
buttons to select a period of time after which the TV
automatically switches to standby mode: OFF / 10 / 20 / ... / 180 / 240 min
and then press the OK button to confirm. The timer begins to count down
from the number of minutes selected.
Move Back
MENU
Select
OK
Quit
EXIT
EXTRAS
Schedule List
Start Recording
Sleep Timer
Recorded List
Timer Record
PVR File System
Off
If you turn the TV off after setting the sleep timer,
the sleep timer setting will be erased.
4. Press the Menu button to return back to the main menu.
5. Press the
Exit button to exit the menu.
Start Recording
Allows you to start an instant recording.
1. Press the Menu button and then press the
buttons to select the
EXTRAS menu.
2. Press the
buttons to select Start Recording and then press the OK
button.
Move Back
MENU
Select
OK
Quit
EXIT
EXTRAS
Schedule List
Start Recording
Sleep Timer
Recorded List
Timer Record
PC Setup
PVR File System
Off
3. The recording bar will show (photo) and begins recording the programme
on the current channel.
4. Press the Menu button to return back to the main menu.
5. Press the
Exit button to exit the menu.
L23IP11_IB_Running Change110923_Annie.indd 25 11年10月13日 下午6:07

Logik L23IP11 Specifications

General

Brand	Logik
Model	L23IP11
Category	TV
Language	English