38
GB
Entertainment
4. The TV will automatically connect to the i-Player server and register with
it. If there is an update available, the server will deliver it at this time.
Connecting to a Wired Network
Use a Local Area Network (LAN) cable or an Ethernet cable to connect the TV’s NETWORK socket to the corresponding port on
your router socket.
Connecting to Network
You can set up your TV through your local area network (LAN) using a wired or wireless connection.
• If wired and wireless networks are both available, wired network is the preferred method.
• Do not connect a modular phone cable to the NETWORK socket.
• After making a physical connection, a small number of home networks may require the TV network settings to be
adjusted. For most home networks, the TV will connect to automatically without any adjustments.
• Since there are various connection configurations, please follow the specifications and instruction of your
telecommunication carrier, internet service provider and router setting user manual.
Rear Left Side View of TV
Broadband Router /
Wireless Router
Ethernet Cable
(included)
LAN1WAN LAN2 LAN3 LAN4
Internet
Wired Network Setup
Use the Network Setup when connecting your TV to a wired network.
1. Plug the connected devices into the mains socket before switching on the TV.
2. Press the STANDBY button on the top panel of the TV or the
button on the remote control to turn on your TV.
3. Press the
I-Player button on the remote control to enter i-Player.
When you first enter i-Player there is a delay whilst the network card
boots. Please be patient.
Entertainment
L23IP11_IB_Running Change110923_Annie.indd 38 11年10月13日 下午6:08
To Next Page
Loading...
Need help?
General
