Logik L32HE12 User Manual

GB
Customising TV Settings
25
7. When the download is complete, the TV will automatically upgrade the
software.
8. When the update is complete, the TV will return to standby mode.
9. Press the
button on the right side bottom panel of the TV or on the
remote control to switch on the TV.
5. During normal DTV viewing, if the TV detects the latest firmware from the
DTV signal, the Over Air Download screen will appear. Press the
buttons
to select Yes/ No for the upgrade procedure.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
SoftwareUpdate(OverAirDownload)
The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.
1. Press the MENU button on the remote control and then press the
buttons to select the CHANNEL menu and then press the OK button.
2. Press the
buttons to select SoftwareUpdate(OAD) and then press
the OK button to select On.
3. Press the BACK button to return to the previous menu or press the
MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Signal Information
CI Information
Software Update(OAD)Off
Software Update(USB)
Channel Edit
Yes No
New FW is available for upgrading
TV Version V0.01
Stream Version v0.03
Yes to upgrade.
No to ignore this upgrade.
EXIT
Download
20%
Software Update(OAD)
71%
6. If you select Ye s, the over air download will start. Press the EXIT button if
you want to stop the download and exit the menu.
During download, please do not turn off or unplug your TV.
If you experience difficulties after the software update, we recommend
that you restore your TV to the factory default settings. To do this, follow
the steps below:
1. Press the MENU button on the remote control to go to the MAIN menu.
Press the
buttons to select OPTION and then press the OK button.
2. Press the
buttons to select RestoreFactoryDefault and then press
the OK button. Press the
button to select Yes to reset the setting.
3. The TV will restore all settings and go to the First Time Installation. Follow
the FirstTimeInstallation steps (refer to page 17-19 for details).
SoftwareUpdate(USB)
This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website:
http://knowhow.com/ or call our UK Call Centre on 08445611234. Our UK Customer Contact Centre is open Monday-Saturday
8am-8pm or Sunday 8am-6pm.
L32HE12_IB_Running Change_120528_Annie.indd 25 12年5月28日 下午7:01

Logik L32HE12 Specifications

General

Brand	Logik
Model	L32HE12
Category	LED TV
Language	English