11
General Operation
Switching the Unit ON/OFF
• Press ON/OFF button on the unit or remote control to switch the unit on/o.
• To completely switch o the unit, unplug from the mains supply.
Setting Evaporating / Cooling Mode
Press EVA. / COOLER button on the unit or Evaporator/Cooler button on the remote control
to select between Evaporator or Air Cooler mode.
The unit can humidify indoor area in Evaporator mode. Make sure that there is water in
the water tank, and keep it above MIN and below MAX level.
Adjusting the Louvre
• Press OSC. button on the unit or SWING button on the remote
control repeatedly to switch on/o the auto-swing (left & right)
function of the unit.
• You may also manually adjust the louvre up and down.
Do not put objects or hands into the louvre opening.
Setting the Auto On/O Time
Press TIMER button on the unit or button on the remote control repeatedly to set the power-
on time (when the unit is in Standby mode) and power-o time (when the unit is in ON mode)
between OFF and from 1h to 7h.
Selecting Fan Mode
Press MODE button on the unit or Wind Type button on the remote control to select between
Natural Wind, Steady and Slow Wind and Normal mode.
Both indicators will be o in Normal fan mode.
Selecting Speed
Press SPEED button on the unit or button on the remote control to select the wind speed
between high / medium / low level.
L48ACW20_IB_Final191210V1.indd 11 11/12/2019 11:47
To Next Page
Loading...
Need help?
General
