EasyManuals Logo

Logik L48ACW20 User Manual

Logik L48ACW20
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Cleaning and Maintenance
Make sure to unplug the unit before cleaning and maintenance.
Cleaning the Exterior
Use a soft cloth to wipe down the exterior.
Do NOT use any abrasive cleaning agents or detergents.
Do NOT immerse any part of the unit in water or any other liquid.
Cleaning the Grille and Filter
1. Remove the grille from the rear of the unit.
2. Remove the honeycomb lter, and then the lter from the grille.
3. Clean the lter in warm water with neutral detergent.
4. Make sure both lters are thoroughly dry before installing back onto the grille.
5. Replace the grille back into the lter holder.
Do not switch on the unit when the grille and lters are
removed from the unit.
Storing the Unit
If the unit will not be used for a long period, make sure it is stored properly.
Ensure the unit is completely drained of water and dry.
Ensure the air lter is cleaned.
Ensure the unit is unplugged.
Ensure the batteries are removed from the remote control.
L48ACW20_IB_Final191210V1.indd 12 11/12/2019 11:47

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L48ACW20 and is the answer not in the manual?

Logik L48ACW20 Specifications

General IconGeneral
BrandLogik
ModelL48ACW20
CategoryAir Conditioner
LanguageEnglish

Related product manuals