19
DAB Display Modes
Every time you press the INFO button, the lower segment of the display will cycle through
the following display modes:
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster may include with their
transmissions. The message usually includes information, such as program details etc.
Signal Strength
The display will show a slide bar to indicate the signal strength, the stronger the signal,
the longer the bar will be from left to right.
Programme Type
This describes the “Style” or “genre” of music that is being broadcast e.g. “Rock” or
“
Classical”
. If the information is not available, the display will sho
w
“<Programme
T
ype>”
.
Multiplex Name
A multiplex is a collection of radio stations that are bundled and transmitted on one frequency.
There are national and local multiplexes. Local ones contain stations that are specic to
that area.
DAB – unlike normal radio, groups together several radio stations and transmits
them on one frequency.
Channel Number/Frequency
The number and frequency of the present station will be displayed.
Signal Error
This shows the quality of the signal reception, with 0 being the best quality reception.
Audio Bit Rate
The display will show the digital audio bit rate being received.
Power Status
The display will show the power source being used. If the power source is battery it will
show the battery capacity.
Time
The broadcaster (radio station) provides clock information automatically so there’s no need
to manually set this information.
Date
The broadcaster (radio station) provides date information automatically so there’s no need
to manually set this information.
L55DAB15_IB_Final200325V6.indd 19 25/03/2020 17:56
To Next Page
Loading...
Need help?
General
