GB
10
Connecting the Power
Mains Power
Connect the mains adapter (included) to the 9V DC
Socket on the back of the unit and then plug into the
mains socket and switch on.
Inserting Remote Control Batteries
Insert the battery (CR2025) as shown below. Make sure the ‘+’ sign is facing up.
DC IN 9V
AUX IN
FM
ANT
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could
cause personal injury or damage to property.
• Install the batteries correctly by following the polarity (+ and –) indications in the battery
compartment.
• Use only the types of the batteries which are indicated in this manual.
• Do not install new batteries with used ones and do not mix different types of batteries.
• Do not dispose of the used batteries as domestic waste. Dispose of them in accordance with
local regulations.
• If you are not going to use the unit for a long time, remove the batteries to avoid damage
from battery leakage and corrosion.
L5DABiP13E_IB_121010_Michelle.indb 10 10/10/2012 10:39 AM
To Next Page
Loading...
