GB
16
Setting the Alarms
Your unit has 2 alarms that you can set to wake you up with a buzzer, music from the radio or
music from your iPod/iPhone. The volume level can also be set.
Setting alarm 1
1. Make sure your unit is switched on.
2. Press the Alarm 1 button. The words ‘Alarm 1 Setup’ will be displayed.
3. Press the Select/Enter button.
4. Press the Up arrow button. The words ‘Alarm On’ will be displayed.
5. Press the Select/Enter button.
6. Press the Up and Down arrows to select the hour you would like the alarm to switch on.
7. Press the Select/Enter button.
8. Press the Up and Down arrows to select the minutes you would like the alarm to switch on.
9. Press the Select/Enter button.
10. Press the Up and Down arrows to select the duration you would like the alarm to switch on
for. From 15-90 minutes.
11. Press the Select/Enter button.
12. Press the Up and Down arrows to select the function you want to wake up to. Buzzer, DAB,
FM or iPod.
13. Press the Select/Enter button.
14. Press the Up and Down arrows to select the frequency of the alarm. It can be set to switch
on Daily, Once, Weekends or Weekdays. If you select once you will need to set the date you
would like the alarm to sound.
15. Press the Select/Enter button.
16. Press the Up and Down arrows to select the volume level you would like the alarm to
switch on at. You will not be able to hear this volume level while setting the alarm mode.
17. Press the Select/Enter button. The words ‘Alarm Saved’ will be displayed. The alarm bell
symbol will also be displayed with number 1 next to it.
Setting alarm 2
• Press the Alarm 2 button, then repeat the instructions above.
Reviewing the alarm setting
• Press the Alarm 1 or 2 button, then press the Select/Enter button repeatedly to scroll
through all the alarm settings.
Cancelling the alarm
• Press Alarm 1 or 2 then press the Up arrow until ‘OFF’ flashes then press Select/Enter.
L5DABiP13E_IB_121010_Michelle.indb 16 10/10/2012 10:39 AM
To Next Page
Loading...
